WHS Documents for Carpenters
Site-specific, delivered in about 4 minutes · free revision within 24h if your builder asks for changes
Carpenters on an Australian construction site need a core WHS document set built around the SWMS: a site-specific Safe Work Method Statement for each high risk activity, a SWMS register, current licences, Safety Data Sheets, and induction and sign-on records. Which SWMS you need is driven by the high risk construction work a carpenter does: falls during frame and truss erection, structural collapse during alterations, power tool injuries (saws, nail guns).
The core WHS documents a carpenter needs
- ✓ Site-specific SWMS covering each high risk activity (legally required under your state's WHS Regulations, provision 299)
- ✓ A SWMS register indexing every document, version and review date
- ✓ High risk work licences and carpenter trade licences
- ✓ Safety Data Sheets for hazardous chemicals, and a chemical register
- ✓ Site induction record and daily sign-on / SWMS acknowledgement sheets
The SWMS a carpenter usually needs
A SWMS must cover each of these high risk construction work activities before the work starts. The Trade SWMS Pack generates one for each, site-specific to your job:
- ✓ Wall and roof frame erection above 2 m
- ✓ Roof truss installation
- ✓ Structural alterations requiring temporary support
- ✓ Formwork construction and stripping
- ✓ First and second fix carpentry using power tools
- ✓ External cladding and fibre cement sheeting
- ✓ Stair and balustrade installation
- ✓ Working from scaffolds and mobile scaffolds
The high risk construction work that triggers a carpenter's SWMS
A SWMS is legally required because carpenters routinely do this high risk construction work:
- ✓ Risk of a person falling more than 2 metres
- ✓ Structural alterations or repairs requiring temporary support
See all 18 high risk construction work categories and how they map to your work.
Same documents, different state citations
A carpenter in NSW and one in Victoria need the same documents, but each SWMS must cite the right law: the harmonised WHS Regulations in seven jurisdictions, or the OHS Regulations 2017 in Victoria. See the full SWMS requirements by state, or open the carpenter WHS documents page for your state:
Carpenter WHS documents NSWCarpenter WHS documents VICCarpenter WHS documents QLDCarpenter WHS documents WACarpenter WHS documents SACarpenter WHS documents TASCarpenter WHS documents ACTCarpenter WHS documents NT
Common questions
▸What WHS documents does a carpenter need on site?
At minimum, site-specific SWMS covering every high risk activity you perform (one SWMS can cover several activities), a SWMS register, your high risk work and trade licences, Safety Data Sheets for any hazardous chemicals, and proof of induction. The SWMS is the legally required one and the one a principal contractor checks first.
▸How many SWMS does a carpenter need?
Every high risk construction work activity you do must be covered, which for carpenters is usually the 8 activities listed above. One SWMS can legally cover several activities, but most trades keep one per activity because that is how builders review them. The Trade SWMS Pack generates all of them from one questionnaire for A$179.
▸Do carpenters need different documents in different states?
The documents are the same; the legislation they cite differs. Seven jurisdictions use the harmonised WHS Regulations (provision 299 for the SWMS duty; NSW's WHS Regulation 2025 cites it as s 299); Victoria uses its OHS Regulations 2017. A SWMS should be re-cited and re-reviewed before it is used in another state.
Every SWMS a carpenter needs, in one go
The Trade SWMS Pack generates all 8 SWMS above from a single questionnaire, plus the register, toolbox talks and sign-on sheets, for A$179.
See the Trade SWMS PackKeep exploring
SWMS for carpentersWHS documents by trade (all)Trade SWMS PackFree SWMS templateElectrician WHS documentsPlumber WHS documentsRoofer WHS documentsScaffolder WHS documentsConcreter WHS documentsBricklayer WHS documents