SPSWMS Pack
Site-specific · Verified before delivery · All 8 states and territories

A site-specific SWMS the builder won't knock back, in 10 minutes.

The builder wants your SWMS before the crew can start, and copy-paste templates are the #1 thing they reject. Answer a few questions about your site and crew, and download a verified Safe Work Method Statement written for this job, citing your state's WHS legislation. One SWMS for A$39, or every SWMS your trade needs from A$179.

12 trades · 18 high risk construction work categories · Free revision within 24h if your builder asks for changes

Read a full sample first · Not sure you need one? Free SWMS checker · All free tools

12

trades covered

8

states and territories

4 min

average delivery time

80+

verified WHS citations

You don't want safety software. You want the paperwork that gets your crew on site.

No SWMS, no start

High risk construction work legally requires a SWMS before work begins, and the builder or principal contractor has to sight it. Your crew stands around until it exists.

Generic templates get knocked back

The law says site-specific. A reused template with another job's hazards is the #1 reason principal contractors reject a SWMS and send it back for revision.

You never need just one

An electrician on a duplex needs a SWMS for energised work, heights, roof cavities, trenching and more. Buying templates one at a time costs more than the job's margin.

From "send me your SWMS" to done, in three steps

1

Answer a few questions

Company, trade, site address, the builder, your crew, and the high risk construction work categories on this job. Takes about 5 minutes.

2

AI drafts it, verification checks it

Your SWMS is generated against a curated WHS focus list for your trade and state, then run through a three-layer compliance check: every regulation and Australian Standard citation is validated against a verified table, and an adversarial reviewer tries to knock it back the way a principal contractor's HSE manager would.

3

Download it minutes later

A print-ready PDF you can hand the site supervisor or upload to the builder's portal, plus a copy in your email. Builder wants a change? Free revision within 24 hours.

See exactly what you'll hand the site supervisor

This is exactly the document we deliver, shown for a fictional electrical contractor: a full Safe Work Method Statement with step-by-step hazards, risk ratings before and after controls, verified WHS citations, and a worker sign-off block. Read the whole thing before you spend a dollar.

  • 11 sections, the structure HSE managers expect
  • Every citation checked against a verified WHS table
  • Print-ready PDF with sign-on sheet

Safe Work Method Statement

PCBU: Nguyen Electrical Pty Ltd

Project: Kellyville Duplex Fit-Off

Site: 14 Acacia Street, Kellyville NSW

Principal Contractor: Metricon

Step 3: Switchboard isolation and test for dead

Hazards: contact with energised parts. Initial risk: High (L4 x C5). Controls per reg 157 and reg 158: isolate at the main, lock and tag, test for dead with a tester proved before and after…

SWMS Pack · swmspack.comPage 3 of 9

What's in your Safe Work Method Statement

  • Title block: your company, the builder, site address, prepared and review dates
  • High risk construction work categories identified for this job
  • Step-by-step work method with hazards, risk ratings, and controls
  • Controls in hierarchy order: eliminate down to PPE, never PPE-first
  • Plant, equipment, permits, licences, and training requirements
  • Emergency procedures and review triggers
  • Your state's WHS or OHS legislation cited (Victoria handled correctly)
  • Worker sign-off block, print-ready PDF delivered in minutes

Want to see one before you buy? View a full sample SWMS.

What a SWMS costs everywhere else

Same document, three very different price tags and wait times.

Safety consultantTemplate shopsSWMS Pack
PriceA$250 to A$1500A$19 to A$88 per templateA$39, packs from A$179
Turnaround3 to 10 dayshours of DIY editing~4 minutes
Site-specific to this jobYesNo, you fill in blanksYes
State-correct citationsYesOften generic or staleYes, verified against 80+ WHS citations
Victoria handled correctlyYesRarelyYes, OHS Regulations branch
Revisions when the builder asksBilled hourlyYou edit it yourselfFree within 24h

Get yours in minutes

Site supervisor briefing the crew over a printed SWMS before work starts

Built for the morning the builder says "send me your SWMS"

SWMS Pack covers 12 trades across all 8 states and territories, including Victoria's separate OHS Regulations. Every document is generated from your site details and checked against a verified table of 80+ WHS regulation and Australian Standard citations before it reaches you, because the fastest way to lose a day is a knocked-back SWMS.

4 min

average delivery

18

HRCW categories covered

24h

free revision window

One price per site. No subscription required.

Pay for the SWMS your builder demands, download it in minutes. Add a year of toolbox talks (+A$29) at checkout.

Safe Work Method Statement

A$39

A complete Safe Work Method Statement written for one activity on one specific site: your scope, your crew, your equipment, with the high risk construction work categories identified and your state’s WHS or OHS regulation cited.

Title block: PCBU, principal contractor, site address, prepared and review dates

High risk construction work categories identified for your activity

Step-by-step work method with hazards, risk ratings, and controls

Controls in hierarchy order: eliminate, substitute, isolate, engineer, administer, PPE

Best value

Trade SWMS Pack

A$179

All the Safe Work Method Statements your trade’s high risk construction work requires, each generated site-specific from one questionnaire, plus the paperwork that goes with them.

6 to 8 site-specific SWMS for your trade’s activities

SWMS register listing every document, version, and review date

Toolbox talk set matched to your trade

Daily sign-on and SWMS acknowledgement sheets

Builder Site Pack

A$299

For small builders and site supervisors: the Safe Work Method Statements for every high risk activity on one project, plus a site safety plan skeleton, induction sheet, and register.

8 to 16 site-specific SWMS across the trades on your project

Site safety plan skeleton and induction sheet

SWMS register and daily sign-on sheets

Toolbox talk starter set

Popular SWMS by trade

Electrician SWMSPlumber SWMSExcavation SWMSCarpenter SWMSWorking at heights SWMSAll tradesSWMS vs JSASWMS requirements by state

Prefer to start from a blank? Download the free SWMS template (PDF and Word).

Latest from the library

Browse all resources →

Questions tradies actually ask

Will builders and principal contractors actually accept this?

The document follows the structure principal contractors and their HSE managers expect: the high risk construction work categories identified, a step-by-step work method with risk ratings, controls in hierarchy order, and your state's legislation cited. Every SWMS is site-specific, which is exactly what the WHS Regulations require and what generic templates fail. And it's backed by our guarantee: if your builder asks for any change, reply to your delivery email and we revise it free within 24 hours.

How is this different from a template shop or a free AI generator?

A template is homework: you still spend hours replacing another job's hazards with yours, and a reused template is the #1 reason SWMS get knocked back. Free generators produce a document nobody has checked. SWMS Pack generates from your actual site details and then verifies the result: citations against a verified WHS table, your details injected throughout, and an adversarial review pass before anything ships.

How fast do I get the document?

The questionnaire takes about 5 minutes. After checkout your SWMS is generated and verified in roughly 4 minutes per document, then it's an instant download plus an email copy. A small number of orders get an extra compliance check and arrive by email within the hour.

Is this written by AI? Can I trust it?

Yes, and that's exactly why every document goes through a three-layer verification pipeline before delivery: automated checks confirm every regulation and Australian Standard citation against a verified table and that your site details appear throughout; then an adversarial AI reviewer, playing a principal contractor's HSE manager trying to reject the submission, has to pass it. If a document can't pass after repair attempts, it is never delivered silently: you see the specific findings and choose to send a correction (we revise free) or accept the draft with the findings disclosed, and unresolved orders go to human review.

Does it handle my state? What about Victoria?

All 8 states and territories. Seven follow the harmonised WHS Regulations; Victoria runs its own OHS Regulations 2017 with different terminology and citations, and Victorian orders are written to Victorian law specifically. A SWMS written for the wrong jurisdiction is a compliance gap most template sellers ignore.

Is this legal advice? Does it make me compliant automatically?

No. SWMS Pack produces work health and safety documentation. It is not legal advice, and no document alone makes a PCBU compliant. You must review the SWMS with the workers doing the work, adapt it to actual site conditions, and revise it when anything changes. What we eliminate is the consultant price tag and the days of waiting.

More questions? Email support@swmspack.com or read our sample documents.