SPSWMS Pack

Trade SWMS Pack

Every SWMS your trade needs, written for your site, in one go. 6 to 8 site-specific documents from one questionnaire, checked against our library of current state WHS citations, A$179 flat (about A$30 per SWMS).

Delivered in about 4 minutes per document · free revisions within 24h

Page 1 of a sample SWMS: switchboard installation for an electrical contractor in NSW
Page 1 of a sample SWMS. See the full sample

What's inside

  • ✓ 6 to 8 site-specific SWMS for your trade’s activities
  • ✓ SWMS register listing every document, version, and review date
  • ✓ Toolbox talk set matched to your trade
  • ✓ Daily sign-on and SWMS acknowledgement sheets

Why a pack instead of one SWMS at a time

Builders reject copy-paste SWMS: the law requires every document to be specific to the site and the work. The pack generates the full set for your trade from one questionnaire, so every document carries the same site details, crew, and controls, and you walk on site with the whole folder done.

The SWMS in each trade's pack

Pick your trade to see its list. The order form starts with every one ticked; untick any your crew will not do on this site (at least 6 stay in the pack).

Electrician8 SWMS ▾
  • ✓ Working on or near energised electrical installations
  • ✓ Switchboard installation and upgrades
  • ✓ Cable installation and cable tray work at height
  • ✓ Roof cavity and ceiling space wiring
  • ✓ Temporary power and builders supply installation
  • ✓ Underground cable trenching and conduit installation
  • ✓ EWP and ladder work for high-level installations
  • ✓ Testing, fault finding and commissioning
Build this pack for A$179
Plumber8 SWMS ▾
  • ✓ Trenching and laying underground services deeper than 1.5 m
  • ✓ Sewer and stormwater connections (confined space entry)
  • ✓ Roof plumbing and gutter installation above 2 m
  • ✓ Hot water system installation and replacement
  • ✓ Gas line installation and work near pressurised gas mains
  • ✓ Core drilling and penetrations through concrete
  • ✓ Working near underground and in-wall services
  • ✓ Backflow and mains connection work in road reserves
Build this pack for A$179
Carpenter8 SWMS ▾
  • ✓ Wall and roof frame erection above 2 m
  • ✓ Roof truss installation
  • ✓ Structural alterations requiring temporary support
  • ✓ Formwork construction and stripping
  • ✓ First and second fix carpentry using power tools
  • ✓ External cladding and fibre cement sheeting
  • ✓ Stair and balustrade installation
  • ✓ Working from scaffolds and mobile scaffolds
Build this pack for A$179
Roofer8 SWMS ▾
  • ✓ Metal roof installation and replacement above 2 m
  • ✓ Tile roof repairs and re-bedding
  • ✓ Roof sheeting removal and disposal
  • ✓ Gutter and downpipe replacement at height
  • ✓ Fall protection setup: edge protection, static lines, harness work
  • ✓ EWP use for roof access
  • ✓ Working near overhead electrical services
  • ✓ Skylight and whirlybird installation (fragile surface work)
Build this pack for A$179
Scaffolder8 SWMS ▾
  • ✓ Scaffold erection above 4 m (licensed work)
  • ✓ Scaffold dismantling and component lowering
  • ✓ Mobile and tower scaffold assembly
  • ✓ Edge protection and guardrail installation
  • ✓ Scaffold inspection and handover tagging
  • ✓ Working near overhead electrical services
  • ✓ Loading platform and hoist bay installation
  • ✓ Swing stage and suspended scaffold work
Build this pack for A$179
Concreter8 SWMS ▾
  • ✓ Slab pours with concrete pump and agitator trucks
  • ✓ Concrete cutting, coring and grinding (silica controls)
  • ✓ Formwork erection and stripping
  • ✓ Steel fixing and rebar installation
  • ✓ Tilt-up and precast panel work
  • ✓ Screeding and power trowelling
  • ✓ Footing and pier excavation pours
  • ✓ Exposed aggregate and driveway works near traffic
Build this pack for A$179
Bricklayer7 SWMS ▾
  • ✓ Bricklaying above 2 m from scaffolding
  • ✓ Brick and block cutting with demolition saws (silica controls)
  • ✓ Block wall construction including reinforced cores
  • ✓ Brick cleaning with acid solutions
  • ✓ Loading scaffolds and materials handling with telehandler
  • ✓ Retaining wall construction near excavations
  • ✓ Feature and face brickwork on occupied sites
Build this pack for A$179
Painter7 SWMS ▾
  • ✓ Exterior painting above 2 m from ladders and trestles
  • ✓ EWP use for high-level painting
  • ✓ Surface preparation including sanding and washing (lead paint controls)
  • ✓ Spray painting in interior and enclosed areas
  • ✓ Roof and fence spraying
  • ✓ Texture coating application
  • ✓ Working over stairs and voids
Build this pack for A$179
Tiler6 SWMS ▾
  • ✓ Tile cutting and grinding with silica dust controls
  • ✓ Bathroom and wet area tiling with waterproofing membranes
  • ✓ Balcony and external tiling above 2 m
  • ✓ Floor grinding and surface preparation
  • ✓ Stairwell and void-edge tiling
  • ✓ Large format tile handling and installation
Build this pack for A$179
Demolition8 SWMS ▾
  • ✓ Demolition of load-bearing structures
  • ✓ Internal strip-out of non-structural elements
  • ✓ Service isolation and disconnection before demolition
  • ✓ Mechanical demolition with excavator
  • ✓ Manual demolition above 2 m
  • ✓ Temporary propping and structural support
  • ✓ Debris handling, chutes and exclusion zones
  • ✓ Work in areas that may contain asbestos (identification and stop-work triggers)
Build this pack for A$179
Excavation / Earthmoving8 SWMS ▾
  • ✓ Trench excavation deeper than 1.5 m with shoring or benching
  • ✓ Bulk excavation with excavator and truck movements
  • ✓ Excavation near underground services (locate and pothole)
  • ✓ Working near overhead powerlines
  • ✓ Excavation adjacent to roads and traffic corridors
  • ✓ Footing, pier and shaft excavation
  • ✓ Backfilling and compaction with mobile plant
  • ✓ Spotter and exclusion zone procedures around plant
Build this pack for A$179
Solar Installer8 SWMS ▾
  • ✓ Rooftop solar panel installation above 2 m
  • ✓ Panel lifting and loading onto roofs
  • ✓ DC wiring and string connection (energised work controls)
  • ✓ Inverter and switchboard connection
  • ✓ Battery energy storage system installation
  • ✓ Fall protection setup: rails, static lines, harnesses
  • ✓ EWP use for roof access and panel lifting
  • ✓ Working on fragile or brittle roof surfaces
Build this pack for A$179

What a SWMS set costs everywhere else

Same document, three very different price tags and wait times.

Safety consultantTemplate shopsSWMS Pack
PriceA$250 to A$1500A$19 to A$88 per templateA$39, packs from A$179
Turnaround3 to 10 dayshours of DIY editing~4 minutes
Site-specific to this jobYesNo, you fill in blanksYes
State-correct citationsYesOften generic or staleYes, verified against 80+ WHS citations
Victoria handled correctlyYesRarelyYes, OHS Regulations branch
Revisions when the builder asksBilled hourlyYou edit it yourselfFree within 24h

Get yours in minutes

SWMS by trade

ElectricianPlumberCarpenterRooferScaffolderConcreterBricklayerPainterTilerDemolitionExcavation / EarthmovingSolar Installer

Other options

Single site-specific SWMS (A$39)Builder Site Pack (A$299)Sample documents