Carpenter WHS Documents in Australian Capital Territory
Written to Australian Capital Territory legislation · delivered in about 4 minutes · free revision within 24h
A carpenter starting on a Australian Capital Territory site is asked for a set of documents, not just a SWMS. This page covers the whole set: what each document is, who asks for it and when, and what happens if you turn up without it. WorkSafe ACT is the regulator here and the Work Health and Safety Regulation 2011 (ACT) is the law each document has to be written against.
The WHS documents a carpenter needs in Australian Capital Territory
- ✓ A site-specific SWMS for each high risk activity, cited to the Work Health and Safety Regulation 2011 (ACT) (WHS Regulation 2011 (ACT) reg 299)
- ✓ A SWMS register indexing every document, version and review date
- ✓ High risk work licences and carpenter trade licences recognised in Australian Capital Territory
- ✓ Safety Data Sheets for hazardous chemicals, and a chemical register
- ✓ Site induction record and daily sign-on / SWMS acknowledgement sheets
The SWMS a carpenter usually needs
One SWMS per high risk construction work activity. The Trade SWMS Pack generates all of them, cited to Australian Capital Territory law:
- ✓ Wall and roof frame erection above 2 m
- ✓ Roof truss installation
- ✓ Structural alterations requiring temporary support
- ✓ Formwork construction and stripping
- ✓ First and second fix carpentry using power tools
- ✓ External cladding and fibre cement sheeting
- ✓ Stair and balustrade installation
- ✓ Working from scaffolds and mobile scaffolds
The Australian Capital Territory law behind it
| Regulator | WorkSafe ACT |
| Principal Act | Work Health and Safety Act 2011 (ACT) |
| Regulations | Work Health and Safety Regulation 2011 (ACT) |
| Duty to prepare a SWMS | WHS Regulation 2011 (ACT) reg 299 |
| High risk construction work defined in | WHS Regulation 2011 (ACT) reg 291 |
The ACT carries a unique loose-fill asbestos ("Mr Fluffy") legacy affecting many older homes, so demolition and renovation SWMS in the territory should treat asbestos identification as a live risk before any work starts.
The ACT was the first Australian jurisdiction to create an industrial manslaughter offence, introduced in 2004, and it applies to a PCBU or officer whose conduct causes a worker's death. That is the enforcement backdrop your WHS document set has to stand up to on a Australian Capital Territory site.
The hazards these documents have to control
A carpenter SWMS in Australian Capital Territory is judged on whether it names and controls the hazards the trade actually meets:
- ⚠ Falls during frame and truss erection
- ⚠ Structural collapse during alterations
- ⚠ Power tool injuries (saws, nail guns)
- ⚠ Manual handling of frames and sheet material
- ⚠ Silica dust when cutting fibre cement
The high risk work that triggers a carpenter's SWMS
- ✓ Risk of a person falling more than 2 metres
- ✓ Structural alterations or repairs requiring temporary support
Every SWMS a carpenter needs in Australian Capital Territory, in one go
The Trade SWMS Pack generates all 8 SWMS above from one questionnaire, cited to Australian Capital Territory law, plus the register, toolbox talks and sign-on sheets, for A$179.
See the Trade SWMS PackKeep exploring
Carpenter WHS documents (all states)Carpenter SWMS for ACTSWMS requirements by stateTrade SWMS Pack
Carpenter WHS documents in other states: