Concreter WHS Documents in New South Wales
Written to New South Wales legislation · delivered in about 4 minutes · free revision within 24h
Concreters working in New South Wales need a core WHS document set built around a site-specific SWMS for each high risk activity, cited to the Work Health and Safety Regulation 2025 (NSW). In New South Wales the regulator is SafeWork NSW, and the duty to prepare a SWMS before high risk construction work sits in WHS Regulation 2025 (NSW) s 299. The documents are the same as any state; what must be correct here is the legislation each one cites.
The WHS documents a concreter needs in New South Wales
- ✓ A site-specific SWMS for each high risk activity, cited to the Work Health and Safety Regulation 2025 (NSW) (WHS Regulation 2025 (NSW) s 299)
- ✓ A SWMS register indexing every document, version and review date
- ✓ High risk work licences and concreter trade licences recognised in New South Wales
- ✓ Safety Data Sheets for hazardous chemicals, and a chemical register
- ✓ Site induction record and daily sign-on / SWMS acknowledgement sheets
The SWMS a concreter usually needs
One SWMS per high risk construction work activity. The Trade SWMS Pack generates all of them, cited to New South Wales law:
- ✓ Slab pours with concrete pump and agitator trucks
- ✓ Concrete cutting, coring and grinding (silica controls)
- ✓ Formwork erection and stripping
- ✓ Steel fixing and rebar installation
- ✓ Tilt-up and precast panel work
- ✓ Screeding and power trowelling
- ✓ Footing and pier excavation pours
- ✓ Exposed aggregate and driveway works near traffic
The New South Wales law behind it
| Regulator | SafeWork NSW |
| Principal Act | Work Health and Safety Act 2011 (NSW) |
| Regulations | Work Health and Safety Regulation 2025 (NSW) |
| Duty to prepare a SWMS | WHS Regulation 2025 (NSW) s 299 |
| High risk construction work defined in | WHS Regulation 2025 (NSW) s 291 |
NSW remade its regulations as the WHS Regulation 2025, which commenced on 22 August 2025 and replaced the WHS Regulation 2017, so the current SWMS duties are cited as sections (s 299, s 291) rather than clauses.
Industrial manslaughter under the WHS Act 2011 (NSW) carries up to 25 years imprisonment for an individual and a $20 million fine for a body corporate; the offence commenced in 2024. That is the enforcement backdrop your WHS document set has to stand up to on a New South Wales site.
The hazards these documents have to control
A concreter SWMS in New South Wales is judged on whether it names and controls the hazards the trade actually meets:
- ⚠ Respirable crystalline silica from cutting and grinding
- ⚠ Concrete pump line whipping
- ⚠ Cement skin burns
- ⚠ Rebar impalement
- ⚠ Formwork collapse
- ⚠ Powered mobile plant (agitators, pumps)
The high risk work that triggers a concreter's SWMS
- ✓ Work in an area with movement of powered mobile plant
- ✓ Tilt-up or precast concrete work
Every SWMS a concreter needs in New South Wales, in one go
The Trade SWMS Pack generates all 8 SWMS above from one questionnaire, cited to New South Wales law, plus the register, toolbox talks and sign-on sheets, for A$179.
See the Trade SWMS PackKeep exploring
Concreter WHS documents (all states)Concreter SWMS for NSWSWMS requirements by stateTrade SWMS Pack
Concreter WHS documents in other states: