Demolition WHS Documents in Northern Territory
Written to Northern Territory legislation · delivered in about 4 minutes · free revision within 24h
A demolition starting on a Northern Territory site is asked for a set of documents, not just a SWMS. This page covers the whole set: what each document is, who asks for it and when, and what happens if you turn up without it. NT WorkSafe is the regulator here and the Work Health and Safety (National Uniform Legislation) Regulations 2011 (NT) is the law each document has to be written against.
The WHS documents a demolition needs in Northern Territory
- ✓ A site-specific SWMS for each high risk activity, cited to the Work Health and Safety (National Uniform Legislation) Regulations 2011 (NT) (WHS (NUL) Regulations 2011 (NT) reg 299)
- ✓ A SWMS register indexing every document, version and review date
- ✓ High risk work licences and demolition trade licences recognised in Northern Territory
- ✓ Safety Data Sheets for hazardous chemicals, and a chemical register
- ✓ Site induction record and daily sign-on / SWMS acknowledgement sheets
The SWMS a demolition usually needs
One SWMS per high risk construction work activity. The Trade SWMS Pack generates all of them, cited to Northern Territory law:
- ✓ Demolition of load-bearing structures
- ✓ Internal strip-out of non-structural elements
- ✓ Service isolation and disconnection before demolition
- ✓ Mechanical demolition with excavator
- ✓ Manual demolition above 2 m
- ✓ Temporary propping and structural support
- ✓ Debris handling, chutes and exclusion zones
- ✓ Work in areas that may contain asbestos (identification and stop-work triggers)
The Northern Territory law behind it
| Regulator | NT WorkSafe |
| Principal Act | Work Health and Safety (National Uniform Legislation) Act 2011 (NT) |
| Regulations | Work Health and Safety (National Uniform Legislation) Regulations 2011 (NT) |
| Duty to prepare a SWMS | WHS (NUL) Regulations 2011 (NT) reg 299 |
| High risk construction work defined in | WHS (NUL) Regulations 2011 (NT) reg 291 |
The NT was the first jurisdiction to adopt the model WHS laws, enacting them as the Work Health and Safety (National Uniform Legislation) Act 2011, enforced by NT WorkSafe, so its regulation numbering matches the national model.
The Northern Territory's industrial manslaughter offence can carry up to life imprisonment for an individual, among the toughest maximum penalties in the country. That is the enforcement backdrop your WHS document set has to stand up to on a Northern Territory site.
The hazards these documents have to control
A demolition SWMS in Northern Territory is judged on whether it names and controls the hazards the trade actually meets:
- ⚠ Unplanned structural collapse
- ⚠ Asbestos-containing materials
- ⚠ Live services (electrical, gas)
- ⚠ Falling debris and exclusion zones
- ⚠ Powered mobile plant
- ⚠ Silica and dust
The high risk work that triggers a demolition's SWMS
- ✓ Demolition of a load-bearing structure
- ✓ Work likely to disturb asbestos
- ✓ Structural alterations or repairs requiring temporary support
- ✓ Work in an area with movement of powered mobile plant
Every SWMS a demolition needs in Northern Territory, in one go
The Trade SWMS Pack generates all 8 SWMS above from one questionnaire, cited to Northern Territory law, plus the register, toolbox talks and sign-on sheets, for A$179.
See the Trade SWMS PackKeep exploring
Demolition WHS documents (all states)Demolition SWMS for NTSWMS requirements by stateTrade SWMS Pack
Demolition WHS documents in other states: