Plumber WHS Documents in Northern Territory
Written to Northern Territory legislation · delivered in about 4 minutes · free revision within 24h
Plumbers working in Northern Territory need a core WHS document set built around a site-specific SWMS for each high risk activity, cited to the Work Health and Safety (National Uniform Legislation) Regulations 2011 (NT). In Northern Territory the regulator is NT WorkSafe, and the duty to prepare a SWMS before high risk construction work sits in WHS (NUL) Regulations 2011 (NT) reg 299. The documents are the same as any state; what must be correct here is the legislation each one cites.
The WHS documents a plumber needs in Northern Territory
- ✓ A site-specific SWMS for each high risk activity, cited to the Work Health and Safety (National Uniform Legislation) Regulations 2011 (NT) (WHS (NUL) Regulations 2011 (NT) reg 299)
- ✓ A SWMS register indexing every document, version and review date
- ✓ High risk work licences and plumber trade licences recognised in Northern Territory
- ✓ Safety Data Sheets for hazardous chemicals, and a chemical register
- ✓ Site induction record and daily sign-on / SWMS acknowledgement sheets
The SWMS a plumber usually needs
One SWMS per high risk construction work activity. The Trade SWMS Pack generates all of them, cited to Northern Territory law:
- ✓ Trenching and laying underground services deeper than 1.5 m
- ✓ Sewer and stormwater connections (confined space entry)
- ✓ Roof plumbing and gutter installation above 2 m
- ✓ Hot water system installation and replacement
- ✓ Gas line installation and work near pressurised gas mains
- ✓ Core drilling and penetrations through concrete
- ✓ Working near underground and in-wall services
- ✓ Backflow and mains connection work in road reserves
The Northern Territory law behind it
| Regulator | NT WorkSafe |
| Principal Act | Work Health and Safety (National Uniform Legislation) Act 2011 (NT) |
| Regulations | Work Health and Safety (National Uniform Legislation) Regulations 2011 (NT) |
| Duty to prepare a SWMS | WHS (NUL) Regulations 2011 (NT) reg 299 |
| High risk construction work defined in | WHS (NUL) Regulations 2011 (NT) reg 291 |
The NT was the first jurisdiction to adopt the model WHS laws, enacting them as the Work Health and Safety (National Uniform Legislation) Act 2011, enforced by NT WorkSafe, so its regulation numbering matches the national model.
The Northern Territory's industrial manslaughter offence can carry up to life imprisonment for an individual, among the toughest maximum penalties in the country. That is the enforcement backdrop your WHS document set has to stand up to on a Northern Territory site.
The hazards these documents have to control
A plumber SWMS in Northern Territory is judged on whether it names and controls the hazards the trade actually meets:
- ⚠ Trench collapse
- ⚠ Confined space atmospheres
- ⚠ Underground service strikes
- ⚠ Falls from roofs and ladders
- ⚠ Sewage and biological exposure
- ⚠ Hot work on pipework
The high risk work that triggers a plumber's SWMS
- ✓ Work in or near a shaft or trench deeper than 1.5 m, or a tunnel
- ✓ Work in or near a confined space
- ✓ Work on or near pressurised gas distribution mains or piping
Every SWMS a plumber needs in Northern Territory, in one go
The Trade SWMS Pack generates all 8 SWMS above from one questionnaire, cited to Northern Territory law, plus the register, toolbox talks and sign-on sheets, for A$179.
See the Trade SWMS PackKeep exploring
Plumber WHS documents (all states)Plumber SWMS for NTSWMS requirements by stateTrade SWMS Pack
Plumber WHS documents in other states: