Electrician WHS Documents in Tasmania
Written to Tasmania legislation · delivered in about 4 minutes · free revision within 24h
Electricians working in Tasmania need a core WHS document set built around a site-specific SWMS for each high risk activity, cited to the Work Health and Safety Regulations 2022 (Tas). In Tasmania the regulator is WorkSafe Tasmania, and the duty to prepare a SWMS before high risk construction work sits in WHS Regulations 2022 (Tas) reg 299. The documents are the same as any state; what must be correct here is the legislation each one cites.
The WHS documents a electrician needs in Tasmania
- ✓ A site-specific SWMS for each high risk activity, cited to the Work Health and Safety Regulations 2022 (Tas) (WHS Regulations 2022 (Tas) reg 299)
- ✓ A SWMS register indexing every document, version and review date
- ✓ High risk work licences and electrician trade licences recognised in Tasmania
- ✓ Safety Data Sheets for hazardous chemicals, and a chemical register
- ✓ Site induction record and daily sign-on / SWMS acknowledgement sheets
The SWMS a electrician usually needs
One SWMS per high risk construction work activity. The Trade SWMS Pack generates all of them, cited to Tasmania law:
- ✓ Working on or near energised electrical installations
- ✓ Switchboard installation and upgrades
- ✓ Cable installation and cable tray work at height
- ✓ Roof cavity and ceiling space wiring
- ✓ Temporary power and builders supply installation
- ✓ Underground cable trenching and conduit installation
- ✓ EWP and ladder work for high-level installations
- ✓ Testing, fault finding and commissioning
The Tasmania law behind it
| Regulator | WorkSafe Tasmania |
| Principal Act | Work Health and Safety Act 2012 (Tas) |
| Regulations | Work Health and Safety Regulations 2022 (Tas) |
| Duty to prepare a SWMS | WHS Regulations 2022 (Tas) reg 299 |
| High risk construction work defined in | WHS Regulations 2022 (Tas) reg 291 |
Tasmania remade its regulations as the WHS Regulations 2022, replacing the 2012 version, so current SWMS duties are cited to the 2022 Regulations and enforced by WorkSafe Tasmania.
Tasmania's industrial manslaughter offence commenced on 2 October 2024, with maximum penalties of 21 years imprisonment for an individual and an $18 million fine for a body corporate. That is the enforcement backdrop your WHS document set has to stand up to on a Tasmania site.
The hazards these documents have to control
A electrician SWMS in Tasmania is judged on whether it names and controls the hazards the trade actually meets:
- ⚠ Electric shock and arc flash
- ⚠ Working near energised services
- ⚠ Falls from ladders and EWPs
- ⚠ Roof cavity work (heat, low light)
- ⚠ Underground service strikes
The high risk work that triggers a electrician's SWMS
- ✓ Work on or near energised electrical installations or services
- ✓ Risk of a person falling more than 2 metres
Every SWMS a electrician needs in Tasmania, in one go
The Trade SWMS Pack generates all 8 SWMS above from one questionnaire, cited to Tasmania law, plus the register, toolbox talks and sign-on sheets, for A$179.
See the Trade SWMS PackKeep exploring
Electrician WHS documents (all states)Electrician SWMS for TASSWMS requirements by stateTrade SWMS Pack
Electrician WHS documents in other states: