Electrician WHS Documents in Western Australia
Written to Western Australia legislation · delivered in about 4 minutes · free revision within 24h
A electrician starting on a Western Australia site is asked for a set of documents, not just a SWMS. This page covers the whole set: what each document is, who asks for it and when, and what happens if you turn up without it. WorkSafe WA is the regulator here and the Work Health and Safety (General) Regulations 2022 (WA) is the law each document has to be written against.
The WHS documents a electrician needs in Western Australia
- ✓ A site-specific SWMS for each high risk activity, cited to the Work Health and Safety (General) Regulations 2022 (WA) (WHS (General) Regulations 2022 (WA) reg 299)
- ✓ A SWMS register indexing every document, version and review date
- ✓ High risk work licences and electrician trade licences recognised in Western Australia
- ✓ Safety Data Sheets for hazardous chemicals, and a chemical register
- ✓ Site induction record and daily sign-on / SWMS acknowledgement sheets
The SWMS a electrician usually needs
One SWMS per high risk construction work activity. The Trade SWMS Pack generates all of them, cited to Western Australia law:
- ✓ Working on or near energised electrical installations
- ✓ Switchboard installation and upgrades
- ✓ Cable installation and cable tray work at height
- ✓ Roof cavity and ceiling space wiring
- ✓ Temporary power and builders supply installation
- ✓ Underground cable trenching and conduit installation
- ✓ EWP and ladder work for high-level installations
- ✓ Testing, fault finding and commissioning
The Western Australia law behind it
| Regulator | WorkSafe WA |
| Principal Act | Work Health and Safety Act 2020 (WA) |
| Regulations | Work Health and Safety (General) Regulations 2022 (WA) |
| Duty to prepare a SWMS | WHS (General) Regulations 2022 (WA) reg 299 |
| High risk construction work defined in | WHS (General) Regulations 2022 (WA) reg 291 |
WA was the last jurisdiction to adopt the harmonised model WHS laws (31 March 2022), so its construction case law is still developing; its WHS (General) Regulations 2022 sit alongside separate mining and petroleum safety regulations.
Industrial manslaughter has applied in Western Australia since the WHS Act 2020 (WA) commenced on 31 March 2022, replacing the former Occupational Safety and Health Act 1984, with penalties of up to 20 years imprisonment for an individual and a $10 million fine for a body corporate. That is the enforcement backdrop your WHS document set has to stand up to on a Western Australia site.
The hazards these documents have to control
A electrician SWMS in Western Australia is judged on whether it names and controls the hazards the trade actually meets:
- ⚠ Electric shock and arc flash
- ⚠ Working near energised services
- ⚠ Falls from ladders and EWPs
- ⚠ Roof cavity work (heat, low light)
- ⚠ Underground service strikes
The high risk work that triggers a electrician's SWMS
- ✓ Work on or near energised electrical installations or services
- ✓ Risk of a person falling more than 2 metres
Every SWMS a electrician needs in Western Australia, in one go
The Trade SWMS Pack generates all 8 SWMS above from one questionnaire, cited to Western Australia law, plus the register, toolbox talks and sign-on sheets, for A$179.
See the Trade SWMS PackKeep exploring
Electrician WHS documents (all states)Electrician SWMS for WASWMS requirements by stateTrade SWMS Pack
Electrician WHS documents in other states: