Roofer WHS Documents in Northern Territory
Written to Northern Territory legislation · delivered in about 4 minutes · free revision within 24h
Roofers working in Northern Territory need a core WHS document set built around a site-specific SWMS for each high risk activity, cited to the Work Health and Safety (National Uniform Legislation) Regulations 2011 (NT). In Northern Territory the regulator is NT WorkSafe, and the duty to prepare a SWMS before high risk construction work sits in WHS (NUL) Regulations 2011 (NT) reg 299. The documents are the same as any state; what must be correct here is the legislation each one cites.
The WHS documents a roofer needs in Northern Territory
- ✓ A site-specific SWMS for each high risk activity, cited to the Work Health and Safety (National Uniform Legislation) Regulations 2011 (NT) (WHS (NUL) Regulations 2011 (NT) reg 299)
- ✓ A SWMS register indexing every document, version and review date
- ✓ High risk work licences and roofer trade licences recognised in Northern Territory
- ✓ Safety Data Sheets for hazardous chemicals, and a chemical register
- ✓ Site induction record and daily sign-on / SWMS acknowledgement sheets
The SWMS a roofer usually needs
One SWMS per high risk construction work activity. The Trade SWMS Pack generates all of them, cited to Northern Territory law:
- ✓ Metal roof installation and replacement above 2 m
- ✓ Tile roof repairs and re-bedding
- ✓ Roof sheeting removal and disposal
- ✓ Gutter and downpipe replacement at height
- ✓ Fall protection setup: edge protection, static lines, harness work
- ✓ EWP use for roof access
- ✓ Working near overhead electrical services
- ✓ Skylight and whirlybird installation (fragile surface work)
The Northern Territory law behind it
| Regulator | NT WorkSafe |
| Principal Act | Work Health and Safety (National Uniform Legislation) Act 2011 (NT) |
| Regulations | Work Health and Safety (National Uniform Legislation) Regulations 2011 (NT) |
| Duty to prepare a SWMS | WHS (NUL) Regulations 2011 (NT) reg 299 |
| High risk construction work defined in | WHS (NUL) Regulations 2011 (NT) reg 291 |
The NT was the first jurisdiction to adopt the model WHS laws, enacting them as the Work Health and Safety (National Uniform Legislation) Act 2011, enforced by NT WorkSafe, so its regulation numbering matches the national model.
The Northern Territory's industrial manslaughter offence can carry up to life imprisonment for an individual, among the toughest maximum penalties in the country. That is the enforcement backdrop your WHS document set has to stand up to on a Northern Territory site.
The hazards these documents have to control
A roofer SWMS in Northern Territory is judged on whether it names and controls the hazards the trade actually meets:
- ⚠ Falls from roof edges and through fragile surfaces
- ⚠ Falling objects onto persons below
- ⚠ Overhead powerlines
- ⚠ Heat exposure on exposed roofs
- ⚠ Manual handling of sheets and tiles
The high risk work that triggers a roofer's SWMS
- ✓ Risk of a person falling more than 2 metres
- ✓ Work on or near energised electrical installations or services
Every SWMS a roofer needs in Northern Territory, in one go
The Trade SWMS Pack generates all 8 SWMS above from one questionnaire, cited to Northern Territory law, plus the register, toolbox talks and sign-on sheets, for A$179.
See the Trade SWMS PackKeep exploring
Roofer WHS documents (all states)Roofer SWMS for NTSWMS requirements by stateTrade SWMS Pack
Roofer WHS documents in other states: