Roofer WHS Documents in Tasmania
Written to Tasmania legislation · delivered in about 4 minutes · free revision within 24h
Roofers working in Tasmania need a core WHS document set built around a site-specific SWMS for each high risk activity, cited to the Work Health and Safety Regulations 2022 (Tas). In Tasmania the regulator is WorkSafe Tasmania, and the duty to prepare a SWMS before high risk construction work sits in WHS Regulations 2022 (Tas) reg 299. The documents are the same as any state; what must be correct here is the legislation each one cites.
The WHS documents a roofer needs in Tasmania
- ✓ A site-specific SWMS for each high risk activity, cited to the Work Health and Safety Regulations 2022 (Tas) (WHS Regulations 2022 (Tas) reg 299)
- ✓ A SWMS register indexing every document, version and review date
- ✓ High risk work licences and roofer trade licences recognised in Tasmania
- ✓ Safety Data Sheets for hazardous chemicals, and a chemical register
- ✓ Site induction record and daily sign-on / SWMS acknowledgement sheets
The SWMS a roofer usually needs
One SWMS per high risk construction work activity. The Trade SWMS Pack generates all of them, cited to Tasmania law:
- ✓ Metal roof installation and replacement above 2 m
- ✓ Tile roof repairs and re-bedding
- ✓ Roof sheeting removal and disposal
- ✓ Gutter and downpipe replacement at height
- ✓ Fall protection setup: edge protection, static lines, harness work
- ✓ EWP use for roof access
- ✓ Working near overhead electrical services
- ✓ Skylight and whirlybird installation (fragile surface work)
The Tasmania law behind it
| Regulator | WorkSafe Tasmania |
| Principal Act | Work Health and Safety Act 2012 (Tas) |
| Regulations | Work Health and Safety Regulations 2022 (Tas) |
| Duty to prepare a SWMS | WHS Regulations 2022 (Tas) reg 299 |
| High risk construction work defined in | WHS Regulations 2022 (Tas) reg 291 |
Tasmania remade its regulations as the WHS Regulations 2022, replacing the 2012 version, so current SWMS duties are cited to the 2022 Regulations and enforced by WorkSafe Tasmania.
Tasmania's industrial manslaughter offence commenced on 2 October 2024, with maximum penalties of 21 years imprisonment for an individual and an $18 million fine for a body corporate. That is the enforcement backdrop your WHS document set has to stand up to on a Tasmania site.
The hazards these documents have to control
A roofer SWMS in Tasmania is judged on whether it names and controls the hazards the trade actually meets:
- ⚠ Falls from roof edges and through fragile surfaces
- ⚠ Falling objects onto persons below
- ⚠ Overhead powerlines
- ⚠ Heat exposure on exposed roofs
- ⚠ Manual handling of sheets and tiles
The high risk work that triggers a roofer's SWMS
- ✓ Risk of a person falling more than 2 metres
- ✓ Work on or near energised electrical installations or services
Every SWMS a roofer needs in Tasmania, in one go
The Trade SWMS Pack generates all 8 SWMS above from one questionnaire, cited to Tasmania law, plus the register, toolbox talks and sign-on sheets, for A$179.
See the Trade SWMS PackKeep exploring
Roofer WHS documents (all states)Roofer SWMS for TASSWMS requirements by stateTrade SWMS Pack
Roofer WHS documents in other states: