Toolbox talks for carpenter crews
The talks below match the hazards carpenter crews actually face: falls during frame and truss erection, structural collapse during alterations, power tool injuries (saws, nail guns), manual handling of frames and sheet material, silica dust when cutting fibre cement. Every talk is free and includes a printable sign-on sheet so the meeting is documented.
Carpenter-specific talks
Working at Heights
A fall of more than two metres is high risk construction work, and falls are still one of the biggest killers on Australian building sites. The controls exist and they work: the danger is treating "just a quick one" at the edge as an exception. There are no quick exceptions at height.
reg 78 · reg 79 · AS/NZS 1891
Power Tool Safety
Saws, grinders, nail guns, and drills do the work fast, and they do damage just as fast. Most power tool injuries come from a removed guard, a worn lead, or a moment of taking your attention off the cut. The tool does exactly what you tell it, including the things you did not mean.
reg 36 · reg 44
Formwork and Concrete Pours
Formwork holds tonnes of wet concrete until it cures, and if it fails during the pour it fails fast and takes people with it. Between the collapse risk, the edges to fall from, the pump lines under pressure, and wet cement burning skin, a pour is one of the higher-risk hours on any site.
AS 3610 · reg 78
Core talks every crew needs
Need the carpenter paperwork that gets you on site?
A site-specific SWMS, or every SWMS carpenter work needs, generated in minutes with verified WHS citations.
Electrician talksPlumber talksRoofer talksScaffolder talksConcreter talksBricklayer talksPainter talksTiler talksDemolition talksExcavation / Earthmoving talksSolar Installer talks