Toolbox talks for scaffolder crews
The talks below match the hazards scaffolder crews actually face: falls during erection and dismantling, falling components, scaffold collapse from overloading or poor foundations, proximity to powerlines, manual handling of components. Every talk is free and includes a printable sign-on sheet so the meeting is documented.
Scaffolder-specific talks
Working at Heights
A fall of more than two metres is high risk construction work, and falls are still one of the biggest killers on Australian building sites. The controls exist and they work: the danger is treating "just a quick one" at the edge as an exception. There are no quick exceptions at height.
reg 78 · reg 79 · AS/NZS 1891
Scaffold Safety
Scaffold is the platform that keeps everyone else off ladders, but only if it is erected right, tagged, and left alone. Erecting or dismantling scaffold above four metres is licensed high risk work. The most common scaffold incidents are not spectacular collapses: they are missing planks, removed guardrails, and untagged bays put into use too early.
reg 81 · AS/NZS 4576
Cranes and Lifting Operations
A lift puts a heavy load over people's heads, and everything depends on the gear, the plan, and the communication between the operator and the dogger. Crane and rigging work is licensed high risk work for good reason. The load does not care how experienced you are: it obeys the physics, the slings, and the ground under the outriggers.
AS 2550 · reg 81
Core talks every crew needs
Need the scaffolder paperwork that gets you on site?
A site-specific SWMS, or every SWMS scaffolder work needs, generated in minutes with verified WHS citations.
Electrician talksPlumber talksCarpenter talksRoofer talksConcreter talksBricklayer talksPainter talksTiler talksDemolition talksExcavation / Earthmoving talksSolar Installer talks