Toolbox talks for solar installer crews
The talks below match the hazards solar installer crews actually face: falls from roofs, dc electrical shock from energised strings, fragile roof surfaces, manual handling of panels on ladders, heat exposure, battery storage hazards. Every talk is free and includes a printable sign-on sheet so the meeting is documented.
Solar Installer-specific talks
Working at Heights
A fall of more than two metres is high risk construction work, and falls are still one of the biggest killers on Australian building sites. The controls exist and they work: the danger is treating "just a quick one" at the edge as an exception. There are no quick exceptions at height.
reg 78 · reg 79 · AS/NZS 1891
Working On or Near Live Electrical
Work on or near energised electrical installations is high risk construction work, and it kills quickly. The rule is simple: work de-energised. Live work is prohibited except in the narrow cases the regulations allow, and even then only with the preliminary steps done first. Test for dead every single time, no matter who told you it was off.
reg 157 · reg 158 · AS/NZS 3000
Roof Work
Roofs combine the two things that hurt roofers most: a fall risk over two metres and surfaces that will not always hold your weight. Add heat, overhead lines, and the temptation to nip up for a five-minute job with no gear, and the roof becomes the most dangerous place on the site. Every roof job needs a fall plan before the first foot goes up.
reg 78 · reg 79 · AS 1657
Core talks every crew needs
Need the solar installer paperwork that gets you on site?
A site-specific SWMS, or every SWMS solar installer work needs, generated in minutes with verified WHS citations.
Electrician talksPlumber talksCarpenter talksRoofer talksScaffolder talksConcreter talksBricklayer talksPainter talksTiler talksDemolition talksExcavation / Earthmoving talks