Tiler WHS Documents in South Australia
Written to South Australia legislation · delivered in about 4 minutes · free revision within 24h
A tiler starting on a South Australia site is asked for a set of documents, not just a SWMS. This page covers the whole set: what each document is, who asks for it and when, and what happens if you turn up without it. SafeWork SA is the regulator here and the Work Health and Safety Regulations 2012 (SA) is the law each document has to be written against.
The WHS documents a tiler needs in South Australia
- ✓ A site-specific SWMS for each high risk activity, cited to the Work Health and Safety Regulations 2012 (SA) (WHS Regulations 2012 (SA) reg 299)
- ✓ A SWMS register indexing every document, version and review date
- ✓ High risk work licences and tiler trade licences recognised in South Australia
- ✓ Safety Data Sheets for hazardous chemicals, and a chemical register
- ✓ Site induction record and daily sign-on / SWMS acknowledgement sheets
The SWMS a tiler usually needs
One SWMS per high risk construction work activity. The Trade SWMS Pack generates all of them, cited to South Australia law:
- ✓ Tile cutting and grinding with silica dust controls
- ✓ Bathroom and wet area tiling with waterproofing membranes
- ✓ Balcony and external tiling above 2 m
- ✓ Floor grinding and surface preparation
- ✓ Stairwell and void-edge tiling
- ✓ Large format tile handling and installation
The South Australia law behind it
| Regulator | SafeWork SA |
| Principal Act | Work Health and Safety Act 2012 (SA) |
| Regulations | Work Health and Safety Regulations 2012 (SA) |
| Duty to prepare a SWMS | WHS Regulations 2012 (SA) reg 299 |
| High risk construction work defined in | WHS Regulations 2012 (SA) reg 291 |
South Australia adopted the harmonised model WHS laws through the WHS Act 2012 (SA), enforced by SafeWork SA, and its Construction Work Code of Practice follows the national model, so an interstate harmonised SWMS transfers with a site-specific review.
South Australia's industrial manslaughter offence commenced on 1 July 2024, adding serious criminal penalties where a PCBU or officer is grossly negligent about conduct that causes a worker's death. That is the enforcement backdrop your WHS document set has to stand up to on a South Australia site.
The hazards these documents have to control
A tiler SWMS in South Australia is judged on whether it names and controls the hazards the trade actually meets:
- ⚠ Silica dust from tile cutting and grinding
- ⚠ Falls from balconies and stair voids
- ⚠ Adhesive and epoxy exposure
- ⚠ Knee and back strain
- ⚠ Wet area slips
The high risk work that triggers a tiler's SWMS
- ✓ Risk of a person falling more than 2 metres
Every SWMS a tiler needs in South Australia, in one go
The Trade SWMS Pack generates all 6 SWMS above from one questionnaire, cited to South Australia law, plus the register, toolbox talks and sign-on sheets, for A$179.
See the Trade SWMS PackKeep exploring
Tiler WHS documents (all states)Tiler SWMS for SASWMS requirements by stateTrade SWMS Pack
Tiler WHS documents in other states: