Demolition SWMS in Tasmania
In Tasmania, demolition contractors must prepare a Safe Work Method Statement before starting high risk construction work, under WHS Regulations 2022 (Tas) reg 299, which requires a SWMS before any high risk construction work. The regulator is WorkSafe Tasmania. For demolition work the SWMS must be site-specific and cover the high risk categories the trade routinely hits: demolition of a load-bearing structure, work likely to disturb asbestos, structural alterations or repairs requiring temporary support, work in an area with movement of powered mobile plant. One SWMS can cover several of those activities. A generic template can be reused for recurring work only if it is reviewed and adapted to each site's hazards first; an unreviewed copy does not meet the requirement.
The SWMS law in Tasmania
Demolition work in Tasmania is regulated by WorkSafe Tasmania under the Work Health and Safety Act 2012 (Tas) and the Work Health and Safety Regulations 2022 (Tas). The duty to prepare a SWMS before high risk construction work is set by WHS Regulations 2022 (Tas) reg 299, and the high risk construction work itself is defined in WHS Regulations 2022 (Tas) reg 291. These follow the harmonised model WHS laws, so a SWMS prepared for another harmonised state transfers with a site-specific review.
Tasmania remade its regulations as the WHS Regulations 2022, replacing the 2012 version, so current SWMS duties are cited to the 2022 Regulations and enforced by WorkSafe Tasmania.
Tasmania's industrial manslaughter offence commenced on 2 October 2024, with maximum penalties of 21 years imprisonment for an individual and an $18 million fine for a body corporate. A site-specific SWMS is part of how a demolition business shows it identified and controlled the high risk work these duties attach to, rather than relying on a generic template.
High risk work for demolition crews
The high risk construction work categories a demolition SWMS usually has to cover:
- ✓ Demolition of a load-bearing structure
- ✓ Work likely to disturb asbestos
- ✓ Structural alterations or repairs requiring temporary support
- ✓ Work in an area with movement of powered mobile plant
Typical demolition activities that each need their own SWMS:
- · Demolition of load-bearing structures
- · Internal strip-out of non-structural elements
- · Service isolation and disconnection before demolition
- · Mechanical demolition with excavator
- · Manual demolition above 2 m
- · Temporary propping and structural support
Hazards a demolition SWMS has to control
The hazards that recur on demolition jobs and that a site-specific SWMS is expected to address:
- ⚠ Unplanned structural collapse
- ⚠ Asbestos-containing materials
- ⚠ Live services (electrical, gas)
- ⚠ Falling debris and exclusion zones
- ⚠ Powered mobile plant
- ⚠ Silica and dust
The rules a demolition SWMS is written against
Beyond the general duty in WHS Regulations 2022 (Tas) reg 299, a demolition SWMS in Tasmania is written against the specific model WHS duties and standards that apply to the trade's activities:
- § AS 2601: demolition of structures
- § reg 36: hierarchy of controls for structural collapse, dust, and falling debris
- § reg 78 and reg 79: falls during manual demolition above 2 m
- § reg 157 and reg 158: isolation of electrical services before demolition
- § reg 44 to reg 47: PPE duties
- § Work likely to disturb asbestos must comply with the asbestos provisions of the WHS Regulations; asbestos removal beyond minor quantities is licensed work and is excluded from this SWMS
What Tasmania builders check before you start
A principal contractor in Tasmania collects your SWMS before your crew goes on site and checks four things: that it is site-specific to this job (not a reused template), that every high risk category for demolition work is covered and controlled, that controls follow the hierarchy rather than jumping to PPE, and that it cites Tasmania legislation. SWMS Pack writes to all four: your site details throughout, WHS Regulations 2022 (Tas) reg 299 cited, and an adversarial review pass before delivery.
Common questions
▸Do demolition contractors need a SWMS in Tasmania?
Yes, whenever the work involves any high risk construction work, which for demolition work it usually does (demolition of a load-bearing structure and work likely to disturb asbestos). The duty to prepare it sits with the PCBU carrying out the work, under WHS Regulations 2022 (Tas) reg 299.
▸Which law covers SWMS in Tasmania?
The Work Health and Safety Act 2012 (Tas) and the Work Health and Safety Regulations 2022 (Tas), enforced by WorkSafe Tasmania. These follow the harmonised model WHS laws used in most states.
▸How fast can I get a demolition SWMS for a Tasmania site?
About 5 minutes of questions, then the document is generated and verified in a few minutes and downloads straight away, written to Tasmania legislation and to your specific site.
Demolition SWMS in other states
New South WalesVictoriaQueenslandWestern AustraliaSouth AustraliaAustralian Capital TerritoryNorthern Territory
Other trades in Tasmania
ElectricianPlumberCarpenterRooferScaffolderConcreterBricklayerPainterTilerExcavation / EarthmovingSolar Installer