Solar Installer SWMS in Tasmania
In Tasmania, solar installer contractors must prepare a Safe Work Method Statement before starting high risk construction work, under WHS Regulations 2022 (Tas) reg 299, which requires a SWMS before any high risk construction work. The regulator is WorkSafe Tasmania. For solar installer work the SWMS must be site-specific and cover the high risk categories the trade routinely hits: risk of a person falling more than 2 metres, work on or near energised electrical installations or services. One SWMS can cover several of those activities. A generic template can be reused for recurring work only if it is reviewed and adapted to each site's hazards first; an unreviewed copy does not meet the requirement.
The SWMS law in Tasmania
Solar Installer work in Tasmania is regulated by WorkSafe Tasmania under the Work Health and Safety Act 2012 (Tas) and the Work Health and Safety Regulations 2022 (Tas). The duty to prepare a SWMS before high risk construction work is set by WHS Regulations 2022 (Tas) reg 299, and the high risk construction work itself is defined in WHS Regulations 2022 (Tas) reg 291. These follow the harmonised model WHS laws, so a SWMS prepared for another harmonised state transfers with a site-specific review.
Tasmania remade its regulations as the WHS Regulations 2022, replacing the 2012 version, so current SWMS duties are cited to the 2022 Regulations and enforced by WorkSafe Tasmania.
Tasmania's industrial manslaughter offence commenced on 2 October 2024, with maximum penalties of 21 years imprisonment for an individual and an $18 million fine for a body corporate. A site-specific SWMS is part of how a solar installer business shows it identified and controlled the high risk work these duties attach to, rather than relying on a generic template.
High risk work for solar installer crews
The high risk construction work categories a solar installer SWMS usually has to cover:
- ✓ Risk of a person falling more than 2 metres
- ✓ Work on or near energised electrical installations or services
Typical solar installer activities that each need their own SWMS:
- · Rooftop solar panel installation above 2 m
- · Panel lifting and loading onto roofs
- · DC wiring and string connection (energised work controls)
- · Inverter and switchboard connection
- · Battery energy storage system installation
- · Fall protection setup: rails, static lines, harnesses
Hazards a solar installer SWMS has to control
The hazards that recur on solar installer jobs and that a site-specific SWMS is expected to address:
- ⚠ Falls from roofs
- ⚠ DC electrical shock from energised strings
- ⚠ Fragile roof surfaces
- ⚠ Manual handling of panels on ladders
- ⚠ Heat exposure
- ⚠ Battery storage hazards
The rules a solar installer SWMS is written against
Beyond the general duty in WHS Regulations 2022 (Tas) reg 299, a solar installer SWMS in Tasmania is written against the specific model WHS duties and standards that apply to the trade's activities:
- § reg 78 and reg 79: managing the risk of falls: all rooftop solar work above 2 m
- § reg 157 and reg 158: energised electrical work restrictions (DC strings cannot be fully isolated in daylight)
- § AS/NZS 3000: electrical installations (wiring rules)
- § AS/NZS 1891: industrial fall-arrest systems
- § reg 44 to reg 47: PPE duties
What Tasmania builders check before you start
A principal contractor in Tasmania collects your SWMS before your crew goes on site and checks four things: that it is site-specific to this job (not a reused template), that every high risk category for solar installer work is covered and controlled, that controls follow the hierarchy rather than jumping to PPE, and that it cites Tasmania legislation. SWMS Pack writes to all four: your site details throughout, WHS Regulations 2022 (Tas) reg 299 cited, and an adversarial review pass before delivery.
Common questions
▸Do solar installer contractors need a SWMS in Tasmania?
Yes, whenever the work involves any high risk construction work, which for solar installer work it usually does (risk of a person falling more than 2 metres and work on or near energised electrical installations or services). The duty to prepare it sits with the PCBU carrying out the work, under WHS Regulations 2022 (Tas) reg 299.
▸Which law covers SWMS in Tasmania?
The Work Health and Safety Act 2012 (Tas) and the Work Health and Safety Regulations 2022 (Tas), enforced by WorkSafe Tasmania. These follow the harmonised model WHS laws used in most states.
▸How fast can I get a solar installer SWMS for a Tasmania site?
About 5 minutes of questions, then the document is generated and verified in a few minutes and downloads straight away, written to Tasmania legislation and to your specific site.
Solar Installer SWMS in other states
New South WalesVictoriaQueenslandWestern AustraliaSouth AustraliaAustralian Capital TerritoryNorthern Territory
Other trades in Tasmania
ElectricianPlumberCarpenterRooferScaffolderConcreterBricklayerPainterTilerDemolitionExcavation / Earthmoving